For those wishing to configure their own rack-mounting bass rigs, the Ashdown RPM-1 EVO II preamp puts all the ABM facilities in a convenient rack-mounting package. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Also footswitchable is the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower.
A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM RPM-1 EVO II features a balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. The addition of a high-precision crossover with variable frequency from 35Hz to 160Hz and a level control for the low-pass output, enables the configuration of sophisticated bi-amped systems, in which the bass and mid/high frequencies are amplified separately.
Get Manual (PDF)
Power Requirement | 230 / 115V |
Frequency Response | -3dB at 17Hz and 30kHz |
Speaker Outputs | Minimum impedance 4 Ohms |
High Instrument Input | Impedance 3.9m Ohms, input range 150mV - 20mV p-p |
Low Instrument Input | Impedance 10k Ohms, input range 300mV - 40V p-p |
Line Input | Impedance 22k Ohms, input level 0dBu nominal |
Sub Output | Impedance 1k Ohms, level 0dBu Nominal |
DI Output | 600 Ohms balanced, level 0dBu nominal |
Tuner Output | Impedance 22k Ohms, level 0dBu nominal |
EQ | Bass +/-15dB @ 45Hz Middle +/-15dB @ 660Hz Treble +/-15dB @ 7kHz shelving Slider 1 +/-15dB @ 180Hz Slider 2 +/-15dB @ 340Hz Slider 3 +/-15dB @ 1.3kHz Slider 4 +/-15dB @ 2.6kHz Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave |
Effects Send | Impedance 22k Ohms, level 0dBu nominal |
Effects Return | Impedance 22k Ohms, input level 0dBu Nominal |
H x W x D (mm) | 90 x 483 x 267 |
Weight (kg) | 6 |
Low Pass High Pass Full Range Crossover |
Impedance 1k Ohms, level switched 0/+4dBu Impedance 1k Ohms, level switched 0/+4dBu Impedance 1k Ohms, level switched 0/+4dBu Variable between 35 and 160Hz |
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 교환/반품/환불이 가능합니다. 단, 고객님이 상품을 개봉하여 사용하거나 가치가 훼손된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과 다르거나 다르게 이행된 경우에는 공급받은 날로부터 20일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
※ 상품에 따라 교환 및 반품이 불가능한 경우가 있습니다. 구매전 상품 상세정보를 확인해 주세요.